53 ft
Spring-Ride, Swing-Door

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

Door Opening	Metric	Imperial
Width (in)	29,883 mm	98′ 1/2”
Height (in)	2,794 mm	110”

Mechanics
Suspension	Full slide range, variable-position tandem axles with spring-ride suspension.
Axles	1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires	295/75R 22.5 premium radial tires
Wheels	8.25″ x 22.5″ steel hub-piloted wheels
Brakes	16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS	2 sensor / 1 modulator-valve system
Upper Coupler	AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers	4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear	AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts	Galvanized steel posts on 24″ centers, 12″ or 16″ centers from landing gear forward
Roof	One piece translucent roof with 30% translucency
Floor	1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff	12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors	3/4″ plymetal construction swing-doors, with 5 hinges and 1 locking-rod per door
Lights & Wiring	Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections	7-way ATA plug with no circuit breakers
Air Connections	Swivel gladhands mounted on roadside